DCS in instrument format 
High speed peer-to-peer communications for integration within the Network 6000
RS422 option supporting the TCS Bisynch protocol and Modbus
From standard control structures such as cascade and ratio, preconfigured to
     allow rapid low cost implementation to advanced control using highly flexible SFCs and function blocks
High level process I/O — Thermocouple I/O
IP65 panel mounting seal with supporting fixtures for rack and bin mounting
Multi-language support
Secure access to engineering settings
General description

 

The T640 is in itself a range of controllers. In its simplest form, M006, the controller is supplied with a suite of preconfigured, documented, single and dual loop control structures which only require parameterisation.In its most advanced form, M004,

it is a multipurpose four loop controller configured for continuous control using a powerful set of function blocks supported by

SFC for applications requiring sequential or state dependent control.
The block structured architecture, supported by graphical configuration tools (T500 LINtools), makes complex continuous control strategies easy to develop and maintain. Moreover, LINtools has a powerful Sequential Function Chart editor (SFC/GRAFCET) based on IEC1131-3 standard which allows integration of sequence control with the continuous control database.
Micro DCS
The power of the T640 makes it a complete, self-contained control system. The 2.5Mbit/sec peer-to-peer communications allows groups of instruments to be interconnected without the need for any other components to co-ordinate their activity.The protocol on the peer-to-peer network and the function block architecture are shared with the other members of Network 6000 making it simple to integrate T640s into larger systems. Low cost of ownership The T640 has the DIN panel mounting format,

 72 × 144 mm and is sealed to IP65. However, the instrument can be removed from the front of the panel leaving the plant wiring undisturbed.